KEMPER CHJ Junior Cone Holders   These junior cone holders hold pyrometric cones in the correct position, ensuring the most accurate indication of proper firing. Constructed of heat resistant wire, they possess long life and high durability. CHJ Junior Cone Holders are available in packages of five.
	ORTON Pyrometric Bars   Orton Bars were especially designed to function in the Dawson Kiln Sitter. Same results as small cone centered in Kiln Sitter. The uniform shape makes consistent placement easy without affecting the firing. The novice or beginner will welcome its ease of use, while those practiced in firing will appreciate ...
	ORTON Small Cones   These cones are commonly used in the Dawson Kiln -Sitter. The tapered shape allows some flexibility to adjust the shut off point by placing the thinner or thicker portion of the sensing rod. Small Cones can also be used on the kiln shelf as mini witness cones where space ...
	PARAGON Stilt Stone   Remove unsightly marks that result from stilting the base of your glazed pieces during firing or drip marks on glazed ware. Rub either end of this hand-sized, white aloxite stone over the area until smooth. Measures 4 in. x 3/3 in. x 1 in.
	ROSELLI POTTERY Ceramic Stilts Series PBH   Rod height is 2 1/2 in., base width is 3 in. For bells, bottles, pixies, salt and pepper shakers, vases, etc.
	ROSELLI POTTERY Egg Bar Stilt With Rods   Four hollow stilt rods, two 4 in. long and two 6 in. long, nest easily in the 10 in. base. Base has seven rod holes to adjust distance between rods. Will stilt four bottle stoppers, bells, pixies, vases, figurines, and Easter eggs, and parts such as heads, legs, arms, etc.
	STAR Ceramic Ladle Stilt   For most sizes of ladles, spoons, etc. Holds 12 inch plate. High point is 1 ¾ in. from base, low point is ¾ in. from base.
	STAR Ceramic Stilts   Designed especially for decorating and gloss firing.
	STAR Ceramic Stilts 9-P Points   Nine points; width 2 1/2 in., height 5/8 in. For heavy ware, prevents warping.
	STAR Ceramic Stilts Series 9-3 To 16-3   Metal Point Stilt suitable for most all ceramic requirements. Three point.
	STAR Ceramic Stilts Series 9-4 To 16-4   Sizes to suit practically all requirements in ceramic work. Height is 3/8 in. Four point.
	STAR Ceramic Stilts Series H22-4   A three point high stilt designed to stilt ware with an overhang such as box lids and deep-footed ware. Also ideal for enameling on metal work. Height is 1 1/2 in.
	STAR Ceramic Stilts Series PBL   Use for vases, bottles, salt and pepper shakers. Stationary 4 inch base secures a center rod that is 6 inches tall.
	STAR Ceramic Stilts Series S1 and S2   Single point height 13/4 inch and 1 1/2 inch stilts are handy for supporting ware with an over hang or for placing wherever needed.
	STAR Ceramic Straight T Series Stilts   For propping up ceramic pieces during firing. Prevents glazed areas from sticking to shelves, walls, or other pieces.