CREATEX Airbrush Color Retarder   Createx Retarder enhances the flow of Createx Airbrush Colors and prevents the tip of your airbrush from drying out in extremely dry or humid conditions. It’s also easy to use: just add three drops of Retarder per 1 oz. of Airbrush Color prior to spraying.
	CREATEX Airbrush Illustration Base   The Illustration Base, with added solvent, acts as a binder-based reducer, thinning airbrush colors for improved flow. Reduction can be made at any ratio and will help with atomization and reduce tip drying in airbrushes using a small tip size and operating at lower PSI settings. Available in two sizes.
	CREATEX Airbrush Matte Top Coat   Createx Matte Top Coat is a protective top coat for airbrush colors that dries to a clear matte finish. It’s permanent on most surfaces, including fabric, paper, wood, metal, plaster, canvas, and leather. It’s also easy to use – just spray over your finished airbrush design once it’s dry.
	CREATEX Airbrush Opaque Base   Createx Opaque Base increases opacity when added to Createx Airbrush Transparent Colors. It also extends Createx Airbrush Opaque Colors to lighter values. Createx Opaque Base is available in 4 oz. and 16 oz. bottles.
	CREATEX Airbrush Transparent Base   This transparent medium extends airbrush colors to a lighter value and will not affect the permanence of the color. Add small amounts until the desired transparency of the color shade is achieved. It may also be used as a top binder on fabrics and then heat set.
	LIQUITEX Acrylic Airbrush Medium   Liquitex Airbrush Medium thins acrylics to a sprayable consistency without affecting flexibility, durability, or adhesion. This ready to use, pre-mixed blend of acrylic emulsion, water, retarder, and Flow-Aid can be mixed with all Liquitex paint, mediums, and gesso.
	LIQUITEX Acrylic Flow Aid   Acrylic Flow Aid improves the flow, absorption, and blending of any water-soluble paint, medium, ink, or dye. It minimizes brush marks by reducing the friction of paint application and helps cover large areas with smooth color. On non-absorbent surfaces, Liquitex Flow Aid increases the fluidity and drying time of acrylic ...
	TESTORS Airbrush Thinner   Use to thin Testor and Model Master enamels for airbrushing. Not for use with waterbased paints. 8 oz.
	TESTORS Model Master Acryl Cleaner   Use for cleaning Model Master Acryl Paint and cleaning painting tools. Packaged in 4 oz. plastic applicator bottle.
	TESTORS Model Master Acryl Thinner   This Acryl detail and fine line thinner should be used to thin Testors Model Master Acryl paints. 4 oz. bottles.